Top

Blog List

Did you ever wanted your room decoration to be a smoothly fading light strip in a jar? Inspired by the Pimoroni firefly light I built my own variation with an ATtiny and two AA batteries instead of using a Raspberry Pi Zero and a huge battery pack. There are three LED strings that fade in a sine pattern. Two of them fade anti parallel at one of 16 adjustable speeds. The third fades differently at a second configurable...

(4 votes, average: 5.00 out of 5)
Loading...

I was tired connecting my cellphone with an old cassette adapter to my VW Golf with an Beta 5 in it. I needed something new, something cool. And here it is, a fully functional interface between the Beta 5 and any device you want to play the music with.

This project raised out of an ebay search: I just wanted to know if there is a solution to get an AUX input on the car radio. Yes there is, even complete mp3 players are available. But that’s not what I wanted – at first!

Then I started digging the web for more info about the protocol the radio talks to cd changers.
The idea was to build a tiny thingy that fakes a cd changer and simply enables the AUX input (as it is available in several online stores). But during the development my ambition became greater and I wanted to read the keys pressed on the radio to remote control my RPi.

(3 votes, average: 5.00 out of 5)
Loading...

It’s been one year since I published a compiled kernel for our devices. Now I decided to build a new one and share it!

Some facts about it:

  • As all of my other kernels this one uses heartbeat during boot.
  • It supports the dockstar, goflex net and home.
  • Some of you asked for I2C support, it’s now working on the dockstar and goflex net. i2cdetect -l has the desired output!

If you encounter any missing modules for certain devices, try to compile them yourself with the given headers and give me a hint so I can include them in feature releases.

(2 votes, average: 4.50 out of 5)
Loading...

In my current project I want to interface the FT220x over 1-bit SPI with an TI piccolo TMS320F28027.
After some trouble and various cups of coffee I managed the whole thing by implementing the SPI in pure software.

I wasn’t able to get it working with the built in tri-wire hardware SPI as the FT uses MIOSIO and MISO to send/receive data and status respectively.

Because there is no sample code available on the web concerning this problem I decided to publish my library here. Take a look into the datasheet for further information!

Sending data over SPI to the FT1248/FT220x is quite easy: Just send a WRITE_REQ (0x00) followed by the payload on MIOSIO.

Reading is a bit more complicated: We need to know how many chars to read. Well, send a READ_REQ (0x02), evaluate MISO and read data on MIOSIO if the FIFO is not empty.