Top

debian Tag

(3 votes, average: 5.00 out of 5)
Loading...

Some days ago I wanted to test the performance of a partition with XFS as its filesystem. But I wasn’t able to mount it. After a look into the kernelconfig of gorgone’s heavykernel I noticed that he obviously didn’t build it with XFS-support.

I do want to make the test and take a look at kernelbuilding things anyway. Well, I don’t want to keep it back, so I decided to verbalize the steps I took.
In this guide you will learn how to set up the crosscompile toolchain to let a more powerful CPU do the job. If you prefer doing the whole thing on the dockstar it will take you several hours.
Further more we will go through the build process until we have a deb-file with the built kernel.

(10 votes, average: 4.80 out of 5)
Loading...

It’s nice to have a little home-server like the Seagate Dockstar or the Buffalo Linkstation running debian quite smoothly. What do you do if you would like to use your printer and scanner with more than one device?

Yes, you connect it to your server and share it over the network!
Because I had to set this up in two locations for now I decided to write down those steps I took from powering on the printer through printing the first testpage I can scan later on.

This HowTo requires debian squeeze installed on your Dockstar/Linkstation. If you haven’t done this yet, please refer to other articles in this blog.

(8 votes, average: 5.00 out of 5)
Loading...

Well, if you want to have a secure connection to your dockstar or even your home net, this post describes all steps you have to take to get this done. In my setup I have a dd-wrt router connected to the internet and forwarding all needed ports to the dockstar. You probably don’t use a firewall on the debian machine, but you will have to, because we need package forwarding to reach the home net through the VPN tunnel. I assume you don’t use your dockstar as the default gateway for your LAN, so you will need an additional route in the router:

Let me explain the path of the packages of a ping from a remote machine to a host in the LAN. For the different subnets refer to the exhibit (VPN: 10.8.0.0/24; LAN: 192.168.0.0/24).

(9 votes, average: 4.78 out of 5)
Loading...

You want to turn your little home-server into a download agent you can control through a web-interface or a jabber account on your mobile phone? Then follow these few steps to get this done quickly.
What is pyLoad? Let’s read the introduction from the developers’ website:

pyLoad is a fast, lightweight and full featured download manager for many One-Click-Hoster, container formats like DLC, video sites or just plain http/ftp links. It aims for low hardware requirements and platform independence to be runnable on all kind of systems (desktop pc, netbook, NAS, router).
Despite its strict restriction it is packed full of features just like webinterface, captcha recognition, unrar and much more. [http://pyload.org]

(4 votes, average: 5.00 out of 5)
Loading...

Having debian installed on the dockstar is quite nice but how about access to the data in there? In this article I will explain how you easily set up a data-storage with autofs, hd-idle, samba and proftpd.
I assume you have debian squeeze running on a usb stick and your data you want to share on your network is stored on an external hard-drive.

(8 votes, average: 5.00 out of 5)
Loading...

It’s been some days now when I got my dockstar and I’ve been reading along the web to get more and more information about how to get debian to work with the dockstar. There are a couple of HowTo’s out there, but I had to check at least a few of them to get to know what I wanted to know. So I decided to make my own HowTo as kind as a merged one with everything important in it.

Of course the first step was to unbox the little homeserver, but the second one, the most important step if you are going to put it online is to disable the Pogoplug software before you connect it to the internet by simply disabling the autoupdate on the NAND. You have done this already? Skip to part two!
Well then, you have to go offline, yes your wan-interface must go down.